QA:Testcase SIG/AltArch VF2
Description¶
This is to ensure that the StarFive VisionFive 2 has been tested.
All items in this category are considered ⬇️ - Low priority. It would be good to have this tested, but if it isn't or if it fails then it is inconsequential.
Releases, Architectures, and ISO's¶
| Distro | aarch64 | ppc64le | riscv64 | s390x | x86_64 |
|---|---|---|---|---|---|
| Rocky Linux 9 | N/A | N/A | N/A | N/A | N/A |
| Rocky Linux 10 | N/A | N/A | ⬇️ | N/A | N/A |
Setup¶
- A RPi
- A spare microSD card
- Flash image to microSD card. Method can vary depending on device.
How to test¶
Is there a display output?¶
Description:- Please verify that any external display outputs work.
Does the device boot?¶
Description:- Device should boot to prompt without error.
Can you log-in?¶
Description:- User should be able to log in with the following credentials.
User:rocky / password:rockylinux
Does sudo work?¶
Description:- sudo ls is sufficient for this test.
Is the README there and correct for this device?¶
Description:- cat ~/README and verify content and that the correct device is listed.
Does the expand filesystem script work?¶
Description:- See README for details for each device. In most cases sudo rootfs-expand .
Can the device connect to a wireless network?¶
Description:- Verify the wifi works. Generic directions below.
sudo nmcli radio wifi = enabled
sudo nmcli dev wifi list
sudo nmcli dev wifi connect network-ssid password "network-password"
Can the device connect to ethernet RJ45 network?¶
Description:- Not valid for every device. Verify with an ethernet cable that an ip is given when running ip a.
Can the device get package updates?¶
Description:- Update to latest packages. sudo dnf clean all && sudo dnf update
Note: depending on when this test is run, you may have to switch to the testing repos first. See channel for details.
Do all USB ports work on the device?¶
Description:- Please check every USB port. Using a keyboard is the quick/easy test.
Can you upgrade from previous version to latest?¶
Description:- This requires starting with a fresh install of a previous version then manually updating to the latest. Primary concern is kernel installs and boots after upgrade.
Note:- depending on when this test is run, you may have to switch to the testing repos first. See channel for details.
Author: Chris Stackpole