Ana içeriğe geç

Advanced Commands for Linux users

Advanced commands provide greater customization and controls in more specialized situations once you become familiar with basic commands.


Objectives: In this chapter, future Linux administrators will learn:

✔ some useful commands not covered in the previous chapter.
✔ some advanced commands.

🏁 user commands, Linux

Knowledge: ⭐
Complexity: ⭐ ⭐ ⭐

Reading time: 20 minutes


uniq command

The uniq command is a very powerful command, used with the sort command, especially for log file analysis. It allows you to sort and display entries by removing duplicates.

To illustrate how the uniq command works, let us use a firstnames.txt file containing a list of first names:

antoine
xavier
steven
patrick
xavier
antoine
antoine
steven

Note

uniq requires the input file to be sorted before running because it only compares consecutive lines.

With no argument, the uniq command will not display identical lines that follow each other in the firstnames.txt file:

$ sort firstnames.txt | uniq
antoine
patrick
steven
xavier

To display only the rows that appear only once, use the -u option:

$ sort firstnames.txt | uniq -u
patrick

Conversely, to display only the lines that appear at least twice in the file, use the -d option:

$ sort firstnames.txt | uniq -d
antoine
steven
xavier

To simply delete lines that appear only once, use the -D option:

$ sort firstnames.txt | uniq -D
antoine
antoine
antoine
steven
steven
xavier
xavier

Finally, to count the number of occurrences of each line, use the -c option:

$ sort firstnames.txt | uniq -c
      3 antoine
      1 patrick
      2 steven
      2 xavier
$ sort firstnames.txt | uniq -cd
      3 antoine
      2 steven
      2 xavier

xargs commands

The xargs command allows the construction and execution of command lines from standard input.

The xargs command reads whitespace or linefeed delimited arguments from standard input, and executes the command (/bin/echo by default) one or more times using the initial arguments followed by the arguments read from standard input.

A first and simplest example would be the following:

$ xargs
use
of
xargs
<CTRL+D>
use of xargs

The xargs command waits for an input from the standard stdin input. Three lines are entered. The end of the user input is specified to xargs by the keystroke sequence Ctrl+D. xargs then executes the default command echo followed by the three arguments corresponding to the user input, namely:

$ echo "use" "of" "xargs"
use of xargs

It is possible to specify a command to be run by xargs.

In the following example, xargs will run the command ls -ld on the set of folders specified in the standard input:

$ xargs ls -ld
/home
/tmp
/root
<CTRL+D>
drwxr-xr-x. 9 root root 4096  5 avril 11:10 /home
dr-xr-x---. 2 root root 4096  5 avril 15:52 /root
drwxrwxrwt. 3 root root 4096  6 avril 10:25 /tmp

In practice, the xargs command executed the ls -ld /home /tmp /root command.

What happens if the command to be executed does not accept multiple arguments, such as with the find command?

$ xargs find /var/log -name
*.old
*.log
find: paths must precede expression: *.log

The xargs command attempted to execute the find command with multiple arguments behind the -name option, which caused find to generate an error:

$ find /var/log -name "*.old" "*.log"
find: paths must precede expression: *.log

In this case, the xargs command must be forced to execute the find command several times (once per line entered as standard input). The -L option followed by an integer allows you to specify the maximum number of entries to be processed with the command at one time:

$ xargs -L 1 find /var/log -name
*.old
/var/log/dmesg.old
*.log
/var/log/boot.log
/var/log/anaconda.yum.log
/var/log/anaconda.storage.log
/var/log/anaconda.log
/var/log/yum.log
/var/log/audit/audit.log
/var/log/anaconda.ifcfg.log
/var/log/dracut.log
/var/log/anaconda.program.log
<CTRL+D>

To specify both arguments on the same line, use the -n 1 option:

$ xargs -n 1 find /var/log -name
*.old *.log
/var/log/dmesg.old
/var/log/boot.log
/var/log/anaconda.yum.log
/var/log/anaconda.storage.log
/var/log/anaconda.log
/var/log/yum.log
/var/log/audit/audit.log
/var/log/anaconda.ifcfg.log
/var/log/dracut.log
/var/log/anaconda.program.log
<CTRL+D>

Case study of a backup with a tar based on a search:

$ find /var/log/ -name "*.log" -mtime -1 | xargs tar cvfP /root/log.tar
$ tar tvfP /root/log.tar
-rw-r--r-- root/root      1720 2017-04-05 15:43 /var/log/boot.log
-rw-r--r-- root/root    499270 2017-04-06 11:01 /var/log/audit/audit.log

The special feature of the xargs command is that it places the input argument at the end of the called command. This works very well with the above example since the files passed in will form the list of files to be added to the archive.

Using the example of the cp command, to copy a list of files in a directory, this list of files will be added at the end of the command... but what the cp command expects at the end of the command is the destination. To do this, use the -I option to put the input arguments somewhere else than at the end of the line.

find /var/log -type f -name "*.log" | xargs -I % cp % /root/backup

The -I option allows you to specify a character (the % character in the above example) where the input files to xargs will be placed.

yum-utils package

The yum-utils package is a collection of utilities, built for yum by various authors, which make it easier and more powerful to use.

Note

While yum has been replaced by dnf in Rocky Linux 8, the package name has remained yum-utils, although it can be installed as dnf-utils as well. These are classic YUM utilities implemented as CLI shims on top of DNF to maintain backwards compatibility with yum-3.

Here are some examples of these utilities.

repoquery command

The repoquery command is used to query the packages in the repository.

Examples of use:

  • Display the dependencies of a package (it can be a software package that has been installed or not installed), equivalent to dnf deplist <package-name>
repoquery --requires <package-name>
  • Display the files provided by an installed package (does not work for packages that are not installed), equivalent to rpm -ql <package-name>
$ repoquery -l yum-utils
/etc/bash_completion.d
/etc/bash_completion.d/yum-utils.bash
/usr/bin/debuginfo-install
/usr/bin/find-repos-of-install
/usr/bin/needs-restarting
/usr/bin/package-cleanup
/usr/bin/repo-graph
/usr/bin/repo-rss
/usr/bin/repoclosure
/usr/bin/repodiff
/usr/bin/repomanage
/usr/bin/repoquery
/usr/bin/reposync
/usr/bin/repotrack
/usr/bin/show-changed-rco
/usr/bin/show-installed
/usr/bin/verifytree
/usr/bin/yum-builddep
/usr/bin/yum-config-manager
/usr/bin/yum-debug-dump
/usr/bin/yum-debug-restore
/usr/bin/yum-groups-manager
/usr/bin/yumdownloader
…

yumdownloader command

The yumdownloader command downloads RPM packages from the repositories. Equivalent to dnf download --downloadonly --downloaddir ./ package-name

Note

This command is very useful to quickly build a local repository of a few rpms!

Example: yumdownloader will download the samba rpm package and all its dependencies:

$ yumdownloader --destdir /var/tmp --resolve samba
or
$ dnf download --downloadonly --downloaddir /var/tmp  --resolve  samba
Options Comments
--destdir The downloaded packages will be stored in the specified folder.
--resolve Also downloads the package dependencies.

psmisc packages

The psmisc package contains utilities for managing system processes:

  • pstree: the pstree command displays the current processes on the system in a tree-like structure.
  • killall: the killall command sends a kill signal to all processes identified by name.
  • fuser: the fuser command identifies the PID of processes that use the specified files or file systems.

Examples:

$ pstree
systemd─┬─NetworkManager───2*[{NetworkManager}]
        ├─agetty
        ├─auditd───{auditd}
        ├─crond
        ├─dbus-daemon───{dbus-daemon}
        ├─firewalld───{firewalld}
        ├─lvmetad
        ├─master─┬─pickup
                └─qmgr
        ├─polkitd───5*[{polkitd}]
        ├─rsyslogd───2*[{rsyslogd}]
        ├─sshd───sshd───bash───pstree
        ├─systemd-journal
        ├─systemd-logind
        ├─systemd-udevd
        └─tuned───4*[{tuned}]
# killall httpd

Kill processes (option -k) that access the /etc/httpd/conf/httpd.conf file:

# fuser -k /etc/httpd/conf/httpd.conf

watch command

The watch command regularly executes a command and displays the result in the terminal in full screen.

The -n option allows you to specify the number of seconds between each execution of the command.

Note

To exit the watch command, you must type the keys: Ctrl+C to kill the process.

Examples:

  • Display the end of the /etc/passwd file every 5 seconds:
watch -n 5 tail -n 3 /etc/passwd

Result:

Every 5.0s: tail -n 3 /etc/passwd                                                                                                                                rockstar.rockylinux.lan: Thu Jul  1 15:43:59 2021

sssd:x:996:993:User for sssd:/:/sbin/nologin
chrony:x:995:992::/var/lib/chrony:/sbin/nologin
sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin
  • Monitoring the number of files in a folder:
watch -n 1 'ls -l | wc -l'
  • Display a clock:
watch -t -n 1 date

install command

Contrary to what its name might suggest, the install command is not used to install new packages.

This command combines file copying (cp) and directory creation (mkdir), with rights management (chmod, chown) and other useful functionalities (like backups).

install source dest
install -t directory source [...]
install -d directory

Options:

Options Remarks                          
-b or --backup[=suffix] creates a backup of destination file
-d     treats arguments as directory names              
-D     creates all leading components before copying SOURCE to DEST
-g and -o     sets ownership              
-m     sets permissions              
-p     preserves the timestamps of the sources files          
-t copies all source arguments to the directory

Note

There are options for managing the SELinux context (see the manual page).

Examples:

Create a directory with the -d option:

install -d ~/samples

Copy a file from a source location to a directory:

install src/sample.txt ~/samples/

These two orders could have been carried out with a single command:

$ install -v -D -t ~/samples/ src/sample.txt
install: creating directory '~/samples'
'src/sample.txt' -> '~/samples/sample.txt'

This command already saves time. Combine it with owner, owner group, and rights management to improve the time savings:

sudo install -v -o rocky -g users -m 644 -D -t ~/samples/ src/sample.txt

Note

sudo is required in this case to make property changes.

You can also create a backup of existing files thanks to the -b option:

$ install -v -b -D -t ~/samples/ src/sample.txt
'src/sample.txt' -> '~/samples/sample.txt' (archive: '~/samples/sample.txt~')

As you can see, the install command creates a backup file with a ~ tilde appended to the original file name.

The suffix can be specified thanks to the -S option:

$ install -v -b -S ".bak" -D -t ~/samples/ src/sample.txt
'src/sample.txt' -> '~/samples/sample.txt' (archive: '~/samples/sample.txt.bak')

tree command

Expand the files or directories in the directory in a tree-like manner.

options description
-a All files are listed
-h Prints the size in a more human-readable way
-u Displays file owner or UID number
-g Displays file group owner or GID number
-p Print the protections for each file

For example:

$ tree -hugp /etc/yum.repos.d/
/etc/yum.repos.d/
├── [-rw-r--r-- root     root      1.6K]  epel-modular.repo
├── [-rw-r--r-- root     root      1.3K]  epel.repo
├── [-rw-r--r-- root     root      1.7K]  epel-testing-modular.repo
├── [-rw-r--r-- root     root      1.4K]  epel-testing.repo
├── [-rw-r--r-- root     root       710]  Rocky-AppStream.repo
├── [-rw-r--r-- root     root       695]  Rocky-BaseOS.repo
├── [-rw-r--r-- root     root      1.7K]  Rocky-Debuginfo.repo
├── [-rw-r--r-- root     root       360]  Rocky-Devel.repo
├── [-rw-r--r-- root     root       695]  Rocky-Extras.repo
├── [-rw-r--r-- root     root       731]  Rocky-HighAvailability.repo
├── [-rw-r--r-- root     root       680]  Rocky-Media.repo
├── [-rw-r--r-- root     root       680]  Rocky-NFV.repo
├── [-rw-r--r-- root     root       690]  Rocky-Plus.repo
├── [-rw-r--r-- root     root       715]  Rocky-PowerTools.repo
├── [-rw-r--r-- root     root       746]  Rocky-ResilientStorage.repo
├── [-rw-r--r-- root     root       681]  Rocky-RT.repo
└── [-rw-r--r-- root     root      2.3K]  Rocky-Sources.repo

0 directories, 17 files

stat command

The stat command displays the status of a file or file system.

$ stat /root/anaconda-ks.cfg
  File: /root/anaconda-ks.cfg
  Size: 1352            Blocks: 8          IO Block: 4096   regular file
Device: 10302h/66306d   Inode: 2757097     Links: 1
Access: (0755/-rwxr-xr-x)  Uid: (    0/    root)   Gid: (    0/    root)
Access: 2024-01-20 13:04:57.012033583 +0800
Modify: 2023-09-25 14:04:48.524760784 +0800
Change: 2024-01-24 16:37:34.315995221 +0800
 Birth: 2
  • File - Displays the path location of the file.
  • Size - Displays the file size in bytes. If this is a directory, it displays the fixed 4096 bytes occupied by the directory name.
  • Blocks - Displays the number of allocated blocks. Attention, please! The size of each block in this command is 512 bytes. The default size of each block in ls -ls is 1024 bytes.
  • Device - Device number in decimal or hexadecimal notation.
  • Inode - Inode is a unique ID number the Linux kernel assigns to a file or directory.
  • Links - Number of hard links. Hard links are sometimes referred to as physical links.
  • Access - The last access time of files and directories, i.e. atime in GNU/Linux.
  • Modify - The last modification time of files and directories, i.e. mtime in GNU/Linux.
  • Change - The last time the property is changed, i.e. ctime in GNU/Linux.
  • Birth - Birth time (Creation time). In some documents, it is abbreviated as btime or crtime. You need a file system and kernel version higher than a certain version to display the creation time.

For files:

atime - After accessing the file content using commands such as cat, less, more, and head, the atime of the file can be updated. Please pay attention! The atime of the file is not updated in real-time, and for performance reasons, it needs to wait for a period of time before it can be displayed. mtime - Modifying the file content can update the mtime of the file (such as appending or overwriting the file content through redirection), because the file size is a property of the file, the ctime will also be updated simultaneously. ctime - Changing the owner, group, permissions, file size, and links (soft and hard links) of the file will update ctime.

For directories:

atime - After using the cd command to enter a new directory that has never been accessed before, you can update and fix the atime of that directory. mtime - Performing operations such as creating, deleting, and renaming files in this directory will update the mtime and ctime of the directory. ctime - When the permissions, owner, group, etc. of a directory change, the ctime of the directory will be updated.

Tip

  • If you create a new file or directory, its atime, mtime, and ctime are exactly the same
  • If the file content is modified, the mtime and ctime of the file will inevitably be updated.
  • If a brand new file is created in the directory, the atime, ctime, and mtime of that directory will be updated simultaneously.
  • If the mtime of a directory is updated, then the ctime of that directory must be updated.